New high precision electrometer
Automated setup, no manual adjustments
Scan rate of up to 20mm/s
Complete accurate reliable data
True all-in-one, ready-to-use solutionWith all electronics and cables directly built into the system and just one power cable to connect, the all-in-one BEAMSCAN™ reduces installation time to a minimum.
Simply align it to the LINAC and plug in the power cable. Done.
Ready to scan in a few minutesBEAMSCAN™ comes with a fully automated setup, saving much time and helping prevent typical setup errors.
The interactive BEAMSCAN™ Wizard, which can be easily accessed using the included iPod touch® or your own mobile device, guides you through the system setup in the treatment room – touch by touch, in a fraction of time. No tools, and no manual adjustments required.
Virtual tank leveling:
BEAMSCAN™ uses a unique patented, fully automatic virtual tank leveling that helps eliminate typical error
sources in tank alignment.
Faster, easier, less error-prone
Based on a three-point measurement and advanced mathematical calculations, TRULEVEL aligns the scanning axes virtually to the water surface without physically moving the tank or scanning arms. No leveling tools and no tank shifts required.
Easiest detector installation with patented clip-in TRUFIX®The new clip-in TRUFIX detector positioning system, makes it easier than ever to precisely align a detector both vertically and horizontally in a BEAMSCAN™ water phantom or quickly exchange it without realignment.
Simply select the appropriate detector holder for axial or radial irradiation, clip it onto the TRUFIX base, then insert your detector, and ready you are.
Perfect scans at maximum speedWith enhanced mechanics and a new built-in state-of-the-art electrometer which is capable of speeds of up to 20 mm/s, BEAMSCAN™ delivers pinpoint accurate scans in half the time – every time you use it.
True Wi-Fi connectivityBEAMSCAN™ is equipped with an intelligent web server to offer hassle-free wireless operation. No need to install data cables every time you use it.
Simply access the built-in BEAMSCAN™ web server through your own mobile device or PC and complete your auto setup or perform your measurement tasks – faster and easier than ever before.
Innovation down to the smallest detailFrom wave prevention to evaporation control, from click-fix SSD adjustment to auto field alignment, BEAMSCAN™ features many practical improvements and well thought-out details to make your work much easier.
With its inclined tank bottom and a large water hose, which allow for complete draining, BEAMSCAN™ is as easy to remove and store as it is to install.
BEAMSCAN™ Auto Setup
Ready to scan in a few minutes
Forget time-consuming setup procedures. BEAMSCAN™ software comes with an intelligent Auto Setup allowing you to complete the setup steps easily that require radiation.
The Auto Setup will launch automatically upon start of the software, check-marking the setup routines that have already been performed in the treatment room.
As with BEAMSCAN™ Wizard in the treatment room, the software-based Auto Setup guides you step by step through the system setup in the control room, requiring no manual adjustments or calculations.
Simply start the Auto Setup program from your PC, and let BEAMSCAN™ software do the rest.Learn how easy it is to set up BEAMSCAN™.
Fast, Accurate Beam Data Acquisition
Precision scans at maximum speed
Accelerate beam data collection with automated, TPS-specific task lists to perform multiple measurement tasks in one go. Customize them to your needs with simple drag and drop. Scan profiles twice as fast by doubling the scanning speed - without compromising accuracy.
Key measurement tools at a glance
- TPS-specific, customizable task lists for automatic beam data collection
- Fast scanning mode
- Advanced measurement options, e.g., TPR/TMR, output factors, absolute dose
- SSD conversion to measure large beam profiles without tank shift
- Reference curve overlay for online comparison
- Real-time beam adjustment
- Automatic water level check for efficient evaporation control
Advanced Beam Data Analysis
Analyze your data with a few clicks.
Click on the Analyze button, and BEAMSCAN™ software will instantly analyze your scans based on a preselected dosimetry protocol. FFF profiles are automatically detected and evaluated following recommendations of Fogliata et al.
Key analysis tools at a glance
- Automatic evaluation of FFF beam profiles
- Automated beam data analysis based on international, vendor-specific or user-defined dosimetry protocols
- Comparing profiles (1D Gamma, percentage deviation)
- Superimposing scans to detect asymmetries
- TPR/TMR calculations from depth dose measurements
- Table generator to automatically calculate TPR/TMR, OCR and output factors
- Absolute and film dosimetry (optional)
Enhanced Data Processing
Turn raw data into results.
Choose from a variety of mathematical functions and filters that aid in visualization and data analysis and help you prepare your data for export into your treatment planning system.
Key processing tools at a glance
- Smoothing or averaging data to remove unwanted noise
- Shifting profiles or PDDs along depth axis to correct measurement depths
- Correcting CAX of FFF profiles based on user-defined penumbra values
- Converting measured ionization curves to absorbed dose to water curves
- Normalizing profiles to CAX, a specific point or absolute value
- Mirroring profiles to correct coordinate system or asymmetry
- Creating correction tables for depth- or dose-related corrections
Annual QA and Reporting
Your workflow in mind
Export your analyzed beam data to Track-it. Combined with BEAMSCAN™, the easy-to-use Track-it QA data management software provides you with a comprehensive solution from scanning to reporting that integrates with your workflow and helps you maintain regulatory compliance.
Key reporting tools at a glance
- Quick browser-based access to all QA data from anywhere in your network
- Automated monitoring of QA tasks and QA reports on one single platform
- Predefined, customizable protocol templates, e.g.,
AAPM TG-142 Annual QA, for easy documentation
- Smart AutoFill function to update reports automatically
- Offline/online data synchronization
- Trend charts for easy tracking of machine performance over time
The New Water Phantom: Revolutionary design. Exceptional precision. Fast performance.
True all-in-one, all built-in solution: ‘Plug and go’ installation
True Wi-Fi connectivity: The first 3D water phantom to go wireless.
Wireless Auto Setup: Ready to scan in a few minutes.
Patented TRULEVEL technology: Virtual tank leveling without physically moving the tank or scanning arms
New electrometer: Perfect scans, twice as fast.
Reference-class Semiflex 3D ionization chambers: Latest 3D detector technology for faster scans, for better results.
Clip-in detector installation with patented TRUFIX®: Easily mounted, quickly exchanged and removed.
Click-fix SSD adjustment tool: Correct setting of the SSD made easy.
Form follows function: Inclined tank bottom, large water hose for complete draining
Functionality improved at all levels: Integrated evaporation control
Feature-rich, easy-to-use application software that truly serves your needs.
BEAMSCAN™ with Track-it: Optimized workflow from scanning to documentation
Attention to details: Robust swivel wheels, ample wheelbase. Simply mobile.
Smart accessories that meet practice requirements.
Learn more about BEAMSCAN™ Wireless Auto Setup which gets you ready to scan in a few minutes.
BEAMSCAN™ + Track-it
Improve efficiency by managing your analyzed beam data in Track-it. Explore the benefits.
LINAC Acceptance Testing
TPS Beam Data Commissioning
LINAC Accelerator QA
|Size:||1548 mm (L) x 783 mm (W) x 1298 mm (min. height) / 1798 mm (max. height)|
approx. 240 kg (empty)
approx. 440 kg (filled)
|Scanning range:||500 mm (horiz.) x 500 mm (horiz.) x 415 mm (vert.)|
|Wall thickness:||15 mm|
|Weight:||approx. 42 kg (empty)|
|Size:||701 mm x 633 mm x 704 mm|
|Included:||water vapor permeable dust cover|
|Type:||stainless steel worm gear drive|
|Motor:||three stepper motors|
|Scanning mode:||continuous, step-by-step|
|Scanning speed:||up to 20 mm/s|
|Minimum step size:||0.1 mm|
|Maximum speed:||50 mm/s|
|Moving range:||500 mm|
|Time for full lift:||45 s|
|Minimum step size:||< 1 mm|
|Pumping/draining time:||approx. 5 min (filling), approx. 7 min (draining)|
|Ground clearance:||84 mm|
|Size:||1548 mm (L) x 783 mm (W) x 1056 mm (H) (with push bar)|
|Weight:||180 kg (empty)|
|Access:||standard web browser|
|Application software:||“BEAMSCAN™ Remote” Web App with BEAMSCAN™ Wizard for system setup from any mobile device|
|Chamber voltage:||(0 ... ± 400) V, programmable in 1 V increments|
|Dynamic range:||2 pA … 500 nA in three ranges|
|Time constant:||10 ms in all ranges|
|Non-linearity:||≤ ± 0.5 % acc. IEC 60731|
|Long-term stability:||≤ ± 0.5 % p.a. acc. IEC 60731|
|Reproducibility:||≤ ± 0.5 % acc. IEC 60731|
|Type:||vented cylindrical ionization chamber, waterproof, type 31021|
|Radiation quality:||60Co ... 50 MV photons (9 ... 45) MeV electrons|
|Field size:||(3 x 3) cm² ... (40 x 40) cm²|
|Use:||patented clip-in detector mounting and positioning system|
|Included:||TRUFIX® BS base plate with holders for Semiflex 3D, “click-fix” SSD adjustment tool|
Minimum PC Requirements
|Operating systems:||Windows® 7 Professional / Windows® 8/8.1 Pro / Windows® 10 Pro (x32/x64) with recent service packs and updates|
|Processor:||Pentium IV processor 2 GHz|
|Hard disk, RAM:||100 MB of free space for application software and 2 GB of free space for .NET Framework 4.5.1 • RAM: 2 GB|
|Screen resolution:||XGA (1024 x 768 pixels)|
|Network:||TCP/IP, Ethernet, 100 Mbit/s|
Get ready for support.
- Service Contract Number (AU No.) if available. Please check whether your BEAMSCAN™ is covered by a valid maintenance contract.
- Your full name and contact details (name of facility, location, phone and email)
Type and serial numbers of the following components of your BEAMSCAN™ system:
- PMMA water tank
- Lift carriage
- Control unit
Type and serial number labels can usually be found on the side or bottom of the respective component.
- Software license number and version installed
- Operating system on which the BEAMSCAN™ software is running
Detailed description of the problem or context in which the problem occurred that may help our support specialists to solve it quickly and efficiently, e.g.:
- Step-by-step description of what caused the problem;
- Screenshots or copies of warning, error messages, etc. received;
- Information about whether changes have been made to the system (hardware, software etc.)